Ametek JOFRA DTI050 A Reference Manual page 13

Figure 2 shows the location of the keys, while the table describes the
function of each key.
Fig. 2
Pos. Name
ON/OFF Key
UNITS Key
FUNC Key
TYPE Key
HOLD Key
125821 00
1
3
FUNC
CONFIG
5
HOLD
NEXT
Description
This key is used to turn the indicator on
and off.
This key is used to change temperature
units. This key has a secondary function
as a (up arrow) when setting
configurations.
This key is used to change functions
from TC to mV etc. This key has a
second function (CONFIG) used to set
DTI050 configurations and verify sensor
settings.
This key is for non-intelligent sensors to
change the TC type or RTD type. This
key has a secondary function as the
(ENTER) key when setting
configurations.
This key is used to freeze the reading of
the display. The key has a secondary
function as the (NEXT) key when setting
configurations.
31-08-2006
2
UNITS
4
TYPE
ENTER
6
MAX/MIN
13