Measuring Temperature With Intelligent Sensors; Measuring Ohms; Measuring Mv - Ametek JOFRA DTI050 A Reference Manual

4.2 Measuring temperature with intelligent
sensors
For intelligent sensors simply plug the sensor into the DTI050 and it will
automatically detect the sensor and display it's serial number on the screen.
All of the sensors parameters can be reviewed in the configuration modes
(see section 3.2.1).
For thermocouple sensors CJC can be turned on or off if the sensor
has a built in CJC sensor.
Note...
Make sure to allow proper settling time for thermocouples
before taking readings.
4.3

Measuring Ohms

The resistance of RTD and Thermistor sensors can be measured in ohms by
selecting ohms with the FUNC key. When an intelligent sensor is connected,
ohms will only be available for RTD and Thermistor type sensor.
4.4

Measuring mV

The mV output of TC sensors can be measured by selecting mV with the
FUNC key. When an intelligent sensor is connected, mV will only be
available for TC type sensors.
Note...
Make sure to allow proper settling time for thermocouples
before taking readings.
22 31-08-2006 125821 00