Ametek JOFRA DTI050 A Reference Manual page 29

Parameter units (table 5)
Units
A
V
Cel
Far
Kel
Ohm
On
Off
Sec
Error codes (table 6)
Error number
100
101
102
103
104
105
106
108
110
111
112
125821 00
Meaning
Current in amperes.
Voltage in volts.
Temperature in Celsius.
Temperature in Fahrenheit.
Temperature in Kelvin.
Resistance in Ohms.
Turn something on.
Turn something off.
Time in seconds .
Error description
A non-numeric entry was received where it
should be a numeric entry.
Too many digits entered.
Invalid units or parameter value received.
Entry is above the upper limit of the
allowable range.
Entry is below the lower limit of the
allowable range.
A required command parameter was
missing.
An invalid command parameter was
received.
Invalid sensor type.
An unknown command was received.
Bad parameter received.
The serial input buffer overflowed.
31-08-2006 29