Use the FUNC key to pick the type of sensor you wish to measure
with (TC, RTD or Thermistor).
For thermocouple sensors the TYPE key can be used to select the
sensor's TC type. Cold junction compensation (CJC) can be turned
on or off depending on whether the sensor is equipped with built in
compensation or you wish to provide it externally.
For RTD sensors the TYPE key can be used to select the sensor's
RTD type.
For non-intelligent Thermistor sensors only YSI-400 is available.
Note...
Make sure to allow proper settling time for thermocouples
before taking readings.
125821 00
Table 2; Built in RTD curves
RTD
P10(90)385
P50(90)385
P100(90)385
P200(90)385
P400(90)385
P500(90)385
P1K(90)385
P50(90)391
P100(90)391
P100(90)392
M10(90)427
M50(90)428
M100(90)428
H120(90)672
P100(90)JIS
31-08-2006
21