Auto Re-Run; Timed Stop/Max Run Time - Teledyne Platinum Pocket Manual

the H:M:S to start the sampler. The sampler
can do weekly start and stop sampling with
pause and resume also. If the program is going
to run on a weekly basis, then set the A
R -R to E
E UN

3.5.14 Auto Re-Run

By default, the sampling program must be
manually reset each time it stops, which
indicates to the controller that the sample
containers have been emptied. If you configure
a S E
TART VENT
sampler, enabling the A
parameter would enable the program to restart
without being reset.
Note
You should not enable this parameter unless you are
scheduling automatic start events.

3.5.15 Timed Stop/Max Run Time

This parameter configures the program to
automatically stop a specified number of hours
or minutes after it initiates its interval timers.
The choices are None, 24 HR,12 HR,8HR and
Custom. The custom feature allows you to enter
a shut of value that is not already in the
program.
.
NABLE
to repeatedly start and stop the
Section 3 Programming
UTOMATIC
UTO
R
ERUN
3-37