Other Device Connections - Teledyne Platinum Pocket Manual

Platinum/Optima CVE Refrigerated Sampler
These types of connections can be categorized
as Standard ISCO device connections or other
device connections. Each type is discussed in
Sections 2.8.1.

2.8.1 Other Device Connections

You can connect the sampler to receive a
4-20 mA signal, 0-5 VDC, 0-10 VDC or pulses
from an external device.
Risk of equipment damage. Only experienced
electronic technicians should make the connections
to an external device.
To connect the external device, refer to Table
2-2 and select the appropriate pins. Connect the
wires by inserting the wires into the proper pin
number and tightening them. To complete the
connection, be sure to finish the connector
assembly.
3
1
2-20
CAUTION
Analog Flow Signal
(4 pin connector)
Pin 3+
4
Pin 4-
Pulses (Dry Contacts)
2
Pin 1
Pin 2