Platinum/Optima CVE Refrigerated Sampler
Teledyne ISCO ships suction line in standard
lengths of 3.0 m (10 ft) or 7.6 m (25 ft). Either
length should be cut to the shortest length
feasible for the installation. When installed, the
line should run the shortest possible distance
from the collection point to the sampler,
preferably with a gradual upward slope. Excess
suction line should be cut, not coiled. Coiled
suction line will hold liquid between sample
events which could cross-contaminate samples
or freeze in cold climates. If the standard
lengths are too short, or if you are cutting
compatible
spool, you can use lengths up to 45 m (150 ft).
2.5.1 Vinyl Suction Line
The sampler inlet fitting is on the left side of
the samplers.
fittings are available to choose from. The
sample line is
3
/
" clear PVC tubing which is connected to the
4
a right-angle barbed fitting.
Figure 2-6 Left side of the sampler
2-14
3
/
inch ID suction line from a bulk
8
1
/
" and
2
3
5
/
" x
/
8
8
3
/
" stainless steel barbed
8
" (I.D. x O.D.) or
1
/
" and
2