Table of Contents
Advertisement
Platinum/Optima CVE Refrigerated Sampler
Note
Align the arrow in the center of the rack with center
block located on the table (Figure 2-2).
Figure 2-2 Locating center block
2.4.2 4-15 Liter (Platinum only).
To install the rack and bottles:
1. Pull the sequential table forward.
2. Place the four bottles on the sequential
table using the alignment rack to position
the bottles. Remove the bottle caps.
3. To load or unload the sample bottles there is
a table jog feature. When the program is not
in the run mode, the jog feature is available
by pushing the 0 button on the keypad. The
table will jog 90° each time 0 is pushed.
4. When the bottles are loaded, slide the
sequential table back into place.
2-10
Advertisement
Table of Contents
