Table of Contents
Advertisement
Section 4 Operation
4.1.2 Start Time Delay
If the program is set for N
D
S
O
ELAY TO
TART
(Section 3.5.13), the sampler immediately
begins to operate according to its C
ONFIGURE
and P
settings.
ROGRAM
If the program is set to use a start time, the
sampler will wait for the specified time and
date. During this delay, the display shows the
current time/date and program delay time/date.
When the programmed start time and date
match the sampler's time and date, the sampler
program begins to run.
4.1.3 The Run State
Because the sampler operation is fully
automated, no user intervention is required.
Should there be a need to check on the running
program, you can view the sampler display. It
always reports the current state or operation
and the refrigerator temperature.
4-3
Advertisement
Table of Contents
