Installing A Bottle Kit - Teledyne Platinum Pocket Manual

2.4 Installing a Bottle Kit

The sampler can hold 1, 4, 12, and 24 bottles.
Each of these bottle configurations are supplied
as a kit (see Table 2-1), which is normally
ordered with the sampler or when you desire to
change the bottle configuration.
Part Number
602320001
602320003
602320002
682320026
682320025
299001306
Table 2-1 Bottle Kits
Description
24-bottle Configuration. Includes
complete bottle rack with 24
polypropylene 1-liter wedge
shaped bottles with caps and
discharge tube.
4-bottle Configuration. Includes
bottle rack with 4 polypropylene
15-liter wedge shaped bottles
with caps.
12-bottle Configuration. Includes
complete bottle rack with 12
polyethylene 2.5-liter wedge
shaped bottles with caps and
discharge tube.
1-bottle Configuration. Includes
one polyethylene 3-gallon
(11-liter) container, lid, and full
bottle shutoff switch.
1-bottle Configuration. Includes
one polyethylene 5-gallon
(18.5-liter) container, lid, and full
bottle shutoff switch.
1-bottle Configuration. Includes
one polyethylene 5.5-gallon
(20.5-liter) round bottle and cap.
Section 2 Installation
2-7