Attaching The Suction Line - Teledyne Platinum Pocket Manual

Figure 2-5 One 20 Liter PE Bottle

2.5 Attaching the Suction Line

Note
The suction line is the tubing from the sampling point to
the sampler intake fitting. The sampler typically uses a
3
/ inch ID (9 mm) suction line of lengths from 3 to 150
8
feet. Teledyne ISCO offers vinyl or PTFE-lined suction
lines. The PTFE-lined tubing has a polyethylene jacket
to protect it from kinks and abrasions.The vinyl suction
line contains a very low parts-per-million level of
phenols. If phenol content affects your sample analysis,
use the PTFE-lined suction line.
Section 2 Installation
2-13