Runcontinuously - Teledyne Platinum Pocket Manual

multiple bottle compositing. The following
illustrates this example:
Distribution scheme with
three bottles per sample
event and three samples
per bottle. Sample events .
are numbered

3.5.8 RunContinuously

Sample programs can run indefinitely or stop
by going to P
L . Select P
IMIT
program continuously or P
program when complete. Continuous sampling
resets the distribution when the distribution
sequence is complete. That is, when the last
bottle/set is reached, the next bottle/set is the
first bottle/set.
In this mode, the sampler assumes that any
filled bottles are replaced and ready to receive
samples while the program is running, thus the
pacing interval is never interrupted.
If you select PGM S
until it completes the distribution sequence, at
which time it stops the program and reports
P D
ROGRAM
state until the bottles have been emptied and
the program is restarted.
If your sampler is configured for composite
sampling, refer to Section 3.5.14 for
instructions on continuous sampling.
R O
GM UN
. C
GM ONTINUE
TOP
. The sampler will wait in this
ONE
Section 3 Programming
and then to B
PTS
to run the
S
GM TOP
, the sampler will run
OTTLE
to stop the
3-33