Configure And Program The Sampler; Locking The Sampler - Teledyne Platinum Pocket Manual

Platinum/Optima CVE Refrigerated Sampler
2.9 Configure and Program the
Sampler
To complete the installation, the sampler
software should be configured and
programmed. Refer to Section 3 for
programming instructions or Section 2.11 for
the quick start guide.
Configure the sampler to make sure that it
recognizes what bottle configuration is
installed. Program the sampler to specify how
and when the sampler should collect liquid
samples.

2.10 Locking the Sampler

Locking the sampler is an optional step that
can prevent tampering with the sampler
operation or collected samples.
To prevent tampering with the sampler
operation, the sampler has a P
When enabled, this software feature requires a
numeric password to access most of the control
panel functions. Refer to Section 3.3.9 to enable
this option.
To prevent tampering with the collected
samples, place a padlock on the refrigerator
door latch and control panel.
2-24
L
ROGRAM OCK
.