Safety Checks; Maintenance Procedures - WAGNER Sprint 60 L XE Operating Manual

VERSION 05/2017
OPERATING MANUAL
Prior to maintenance
– Flush and clean the system.
After maintenance
– Carry out safety checks in accordance with Chapter 8.2.3.

8.2.3 SAFETY CHECKS

8.2.3.1 GROUNDING CHECK
Daily: Before starting work, carry out a visual inspection to ensure that the system is grounded.

8.2.4 MAINTENANCE PROCEDURES

The maintenance intervals should be adapted by the operator depending on the level of
use and if necessary the level of soiling.
If in doubt, we recommend contacting WAGNER's specialist personnel.
Maintenance work
Blow out gun and check for sintering
Check gun settings
Check gun discharge pressure
Blow out powder hoses
Check grounding
Check compressed air quality
Check gun voltage
Check powder hoses for bends and sintering
ORDER NUMBER DOC 2354920
Chapter 8.1.2.
per shift
Time stamp
weekly
SPRINT XE
51