Correct Use; Device Type; Type Of Use; For Use In Potentially Explosive Areas - WAGNER Sprint 60 L XE Operating Manual

VERSION 05/2017
OPERATING MANUAL
2

CORRECT USE

2.1

DEVICE TYPE

Manual powder system for manual coating of grounded work pieces.
2.2

TYPE OF USE

The Sprint XE manual system is designed for single and serial coatings for industry and
trade.
WAGNER explicitly prohibits any other use!
Electrostatic manual coating systems may only be used in spray areas equipped in accordance
with EN 12981 or under equivalent ventilation conditions.
The components of the three diff erent versions of the Sprint XE manual system (Airfl uid version,
60 L tank version) are mutually compatible.
The device may only be operated under the following conditions:
Use the device only to work with the products recommended by WAGNER.
Only operate the device as a whole.
Do not deactivate safety fi xtures.
Use only WAGNER original spare parts and accessories.
The operating personnel must be trained on the basis of this operating manual.
Follow the instructions in the operating manual.
2.3

FOR USE IN POTENTIALLY EXPLOSIVE AREAS

The device is suitable for use in potentially explosive areas as defi ned in Directive 2014/34/EU
(ATEX), (see Explosion protection marking Chapter 3.1).
In explosion hazard areas, only use approved explosion-proof
electrical devices.
2.4

PROCESSIBLE WORKING MATERIALS

– types of powder that can be charged electrostatically;
– metallic powder.
Note:
Contact your local WAGNER dealer and the lacquer manufacturer if you encounter
application problems.
2.5

MISUSE

Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
Do not process liquid coating products, e.g. solvents or water-based lacquers;
Do not process food, medicine or cosmetics.
ORDER NUMBER DOC 2354920
SPRINT XE
8