Technical Data - WAGNER Sprint 60 L XE Operating Manual

VERSION 05/2017
OPERATING MANUAL

5.2.3 TECHNICAL DATA

Dimensions:
Height
Width
Depth
Weight
Maximum box size
Maximum fi lling weight of box
Electrical:
Mains (AC) input terminal
Frequency
Input power
Mains (AC) output terminal
Output voltage spray gun
Output current spray gun
Corona current limitation
Tribo current cut off
Pneumatic:
Compressed air connection
Connection hose diameter
Pressure range input air
Air fl ow
Sum of feed and dosing air
Gun air
WAGNER injector type
Compressed air quality according to
ISO 8573.1
WARNING
Exhaust air containing oil!
Risk of poisoning if inhaled.
Insuffi cient paint application quality
Provide compressed air free from oil and water
(Quality Standard 6.5.2 according to ISO 8573.1, 2010)
6.5.2 = particle density ≤ 5 mg/m3; pressure dew point ≤ +7 °C;
oil content ≤ 0.1 mg/m3
Ambient conditions:
If low-melting powders are used, the ambient temperature may have to be lower than 30 °C;
86 °F.
Volume measures for volumes specifi ed in Nm³ (standard cubic meters). One cubic meter
of a gas at 0 °C and 1.013 bar is called norm cubic meter.
ORDER NUMBER DOC 2354920
1,120 mm; 44.10 inch
595 mm; 23.43 inch
740 mm; 29.13 inch
approx. 40 kg; 88.18 lbs
420x420x400 mm; 16.54x16.54x15.75 inches
30 kg; 66.14 lbs
90 VAC–250 VAC
47 Hz–63 Hz
maximum 110 W
Vibrator motor maximum 70 W
maximum 22 Vpp
Max. 0.9 A
5 μA–120 μA (adjustable)
greater than 12 μA
(ATEX: switching off of the unit)
G1/4"
18.5x12.5 mm
0.6–0.8 MPa ; 6–8 bar; 87–116 psi
maximum 15 m³/h; 529.63 cf/h
2–12 m³/h; 70.6–423.7 cf/h
0.05–4.5 m³/h; 1.765–158.9 cf/h
PI-F1, HiCoat ED pump F, PI-F1-S
6.5.2 according to ISO 8573.1, 2010
SPRINT XE
22