VERSION 05/2017
OPERATING MANUAL
1 Only use mains cables with grounding strand!
2 Connect the trolley's grounding cable to the grounding connection of the control unit!
3 Connect the control unit's grounding cable with the signal ground!
4 Connect grounding cable to an uncoated metal part of the booth!
5 Remove all paint from hooks and other hanger parts!
6 Wear electrostatically conductive gloves!
7 Wear electrostatically conductive footwear!
8 The fl oor must be electrostatically conductive!
6.7
SAFETY CHECKS
A skilled person must check to ensure that the device is in a reliable state after it is installed
and commissioned.
This includes:
– Carry out a safety checks in accordance with Chapter 8.2.3.
ORDER NUMBER DOC 2354920
SPRINT XE
37