A Safe Work Environment; Personnel Qualifications - WAGNER Sprint 60 L XE Operating Manual

Sprint xe series manual powder system
Table of Contents

Advertisement

VERSION 05/2017
OPERATING MANUAL

4.1.2 A SAFE WORK ENVIRONMENT

Danger due to dust formation!
Severe or fatal injuries due to explosion hazard or inhalation, swallowing or contact with
the skin or eyes.
The fl oor in the working area must be electrostatically conductive (measurements
according to EN 1081 and EN 61340-4-1).
Paint mist extraction systems/ventilation systems must be fi tted on site according to
local regulations.
Make sure that the ground connection and potential equalization of all system parts
are reliable and continuous and can withstand the expected stress (e.g. mechanical
stress, corrosion).
Ensure that personal protective equipment (see Chapter 4.2.1) is available and is used.
Ensure that all persons within the working area wear static dissipative shoes.
Footwear must comply with EN 20344. The measured insulation resistance must not
exceed 100 M .
Protective clothing, including gloves, must comply with EN 1149-5. The measured
insulation resistance must not exceed 100 M .
Ensure that there are no ignition sources such as naked fl ames, sparks, glowing wires,
or hot surfaces in the vicinity. No smoking.
Maintain suffi cient quantities of suitable fi re extinguishers and ensure that they are
serviceable.
The powder release must be electronically interlocked with the powder spray system
exhaust equipment.
Excess coating product (overspray) must be collected up safely.
The operating company must ensure that an average concentration of powder
lacquer in the air does not exceed 50% of the lower explosion limit (LEL = max.
permitted concentration of powder to air). If no reliable LEL value is available, the
average concentration must not exceed 10 g/m³.
In the event of defects, immediately bring the device or system to a stop and arrange
to have repairs carried out immediately.

4.1.3 PERSONNEL QUALIFICATIONS

Hazard due to incorrect use of device!
Risk of death due to untrained personnel.
Ensure that the operating personnel has been instructed by the operator in
accordance with the operating manual and the operating instructions. The device
must only be operated, maintained and repaired by trained personnel. Refer to the
operating instructions for information about the required personnel qualifi cations.
ORDER NUMBER DOC 2354920
SPRINT XE
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sprint airfluid xe

Table of Contents