Terminations For Adapter Board And Gate Drive Board - AuCom MVE series User Manual

INSTALLATION

6.11 Terminations for Adapter Board and Gate Drive Board

MVE-0070~0540, V02~V06
•
Gate drive board - Layout view
MVE-0070~0540, V11~V13
•
Gate drive board - Layout view
1 Non-conduction fibre-optic connector (Rx)
2 Firing transformer fibre-optic connectors (Tx)
3 Power supply connector (24 VDC)
4 Firing signal (Rx) from power interface board
5 Non-conduction signal (Tx) to power interface board
6 Voltage sensing connector
Reserved
7 - do not use
Reserved
8 - do not use
22
| MVE User Manual (710-17074-00G)
Adapter board - Installed view
Gate drive board - Installed view