AuCom MVE series User Manual page 57

CONTROLLER
Analog A Maximum Adjustment
Parameter 7R
Range: 0% - 600%
Description: Calibrates the upper limit of the analog output to match the signal measured on an external current
measuring device.
Analog A Minimum Adjustment
Parameter 7S
Range: 0% - 600%
Description: Calibrates the lower limit of the analog output to match the signal measured on an external current
measuring device.
7T~7W – Reserved
These parameters are reserved for future use.
8 Display
These parameters allow the controller to be tailored to individual users' requirements.
8A – Language
Options: English (default)
Chinese
Español
Deutsch
Description: Selects which language the controller will use to display messages and feedback.
8B, 8C – F1 and F2 Button Action
Options: None
Setup Auto-Start/Stop
Description: Selects the function of the F1 and F2 buttons on the controller.
• 8B
• 8C
8D – Display A or kW
Options: Current (default)
Motor kW
Description: Selects whether the MVE will display current (amperes) or motor kilowatts on the main monitoring screen.
8E, 8F, 8G, 8H – User-Programmable Screen
Options: Blank
Starter State
Motor Current
Motor pf
Mains Frequency
Motor kW
Motor HP
Motor Temp
kWh
Hours Run
Analog Input
Mains Voltage
Description: Selects which information will be displayed on the programmable monitoring screen.
• 8E
• 8F
8G
•
8H
•
56
| MVE User Manual (710-17074-00G)
F1 Button Action
F2 Button Action
User Screen - Top Left
User Screen - Top Right
User Screen - Bottom Left
User Screen - Bottom Right
Default: 100%
Default: 0%
Português
Français
Italiano
Russian
Default: Setup Auto-Start/Stop
Default: None
Displays no data in the selected area, allowing long messages to be
shown without overlapping.
The starter's operating state (starting, running, stopping or tripped).
Only available for top left and bottom left positions on the screen.
The average current measured on three phases.
The motor's power factor, measured by the soft starter.
The average frequency measured on three phases.
The motor's running power in kilowatts.
The motor's running power in horsepower.
The motor's temperature, calculated by the thermal model.
The number of kilowatt hours the motor has run via the soft starter.
The number of hours the motor has run via the soft starter.
n/a
The average voltage measured on three phases.
Default: Starter State
Default: Blank
Default: kWh
Default: Hours Run