Reset Thermal Models; Programming Menu - AuCom MVE series User Manual

Analog I/O State
This screen shows the current status of the Analog I/O.
NOTE
Input is not supported by this product and this screen will always indicate Input: - - - - %
7.9

Reset Thermal Models

The soft starter's thermal modelling software constantly monitors the motor's performance. This allows the starter to calculate
the motor's temperature and ability to start successfully at any time.
The thermal model for the active motor can be reset if required.
1. Open the Commissioning Menu.
2. Scroll to Reset Thermal Models and press
3. At the confirmation prompt press STORE to confirm or
may have to enter your access code.
4. Select Reset and press
Selecting Do Not Reset returns to previous screen.
When the thermal model has been reset, the screen will display a confirmation message
then return to the previous screen.
CAUTION
Resetting the motor thermal model will compromise thermal model protection and may compromise motor life. Only
reset the thermal model in an emergency.

7.10 Programming Menu

The Programming Menu lets you view and change programmable parameters that control how the MVE operates.
You can access the Programming Menu at any time, including while the soft starter is running. Any changes to the start profile
take effect immediately.
To open the Programming Menu, press the MENU button while viewing the monitoring screens.
To navigate through the Programming Menu:
• to scroll through parameter groups, press the
to open a submenu, press the
•
to view the parameters in a group, press the
•
to return to the previous level, press the
•
to close the Programming Menu, press
•
Adjustment Lock
You can lock the Programming Menu to prevent users from altering parameter settings. The adjustment lock can be turned on
and off using parameter 15B.
To lock the programming menu:
1. Open the Programming Menu.
2. Open the Extended Menu.
3. Select 'Advanced'.
4. Enter the Access Code.
5. Select parameter 15B
6. Select and store 'Read Only'.
.
.
button.
button.
repeatedly.
Adjustment Lock
to cancel the action. You
or button.
button.
CONTROLLER
Analog I/O State
Input: - - - - %
Output A: 04.0mA
Reset Thermal Models
M1 X%
M2 X%
Store to Reset
Reset Thermal Models
Do Not Reset
Reset
MVE User Manual (710-17074-00G) |
35