Table of Contents
Advertisement
Operation
1
3.1.3 Surround Cooling
2
3
4
1
5
6
2
7
When a new tanning process is started the surround
8
cooling is switched on. The surround cooling will
continue to run after the end of the tanning process.
9
Adjusting the intensity
The intensity of surround cooling can be adjusted in 10
steps by button 1. The intensity is indicated in the
display (2) (F0...F9).
10
11
20
1
2
04006 / 0
Pressing button (1) to (-) during tanning reduces the
intensity.
Pressing button (1) to (+) during tanning increases the
intensity.
3.1.4 Air conditioning
2
1
04006 / 0
The air conditioning is also switched on when starting a
tanning session. Diode (1) lights up.
Switching off the air conditioning
Pressing button (2) to (-) during tanning switches off the
air conditioning.
The air conditioning can be switched back on by
pressing button (2). The air conditioning starts with a
delay. The LED (1) flashes until the air conditioning
starts.
optional
1)
1)
04007 / 0
Advertisement
Table of Contents
