Cleaning And Disinfection Of The Sensor - ergoline JK 103/40-3 Operating Instructions Manual

How to use this device
64/88
– Unplug the lamps.
– Clean the reflector.
– Only utilize original lamps.
– Only touch new lamps in the handling zone.
– Test the safety switch to ensure that it works.
The safety switch ensures that the device switches off in the event of a
faulty filter panel or when a filter panel is missing.
– Press the button.
If the button springs back automatically then it is functional.
– Replace the filter panel.
12.16.5

Cleaning and disinfection of the sensor

Not applicable for this device.