Instructions For Replacing The Lamps - ergoline Beauty Angel 7200 Operating Instructions Manual

09/2018 1019179-00A
12.16.4

Instructions for replacing the lamps

Danger of burns from hot lamps and device parts!
If the beauty device was operated before being switched off
and opened, lamps and housing parts may be hot.
– Before replacing lamps or other spare parts, wait
until lamps and metal parts of the device have
cooled down sufficiently.
Beauty Angel lamps
Never replace with UV lamps of any type!

Replace faulty lamps immediately.

Always replace the entire set of lamps after the specified operating time.

Call the customer service department to order replacement lamps or with

any questions, see page 3.
– Turn 90° and carefully remove from the socket.
NOTE:
Small quantities of mercury can escape if the bulb/lamp glass
breaks! Please comply with the following instructions:

Immediately disconnect the device from the mains
power.

Children must leave the room immediately.

Ventilate the room for at least 15 minutes.

Put on disposable gloves.

With the window open: Collect the glass shards and
escaped mercury in a sealable container.

Take the container to a collection site for waste lamps.
Changing the chip card
Not applicable for this device.
How to use this device
WARNING!
Operating instructions – 61/92