Navigation - ergoline Beauty Angel 7200 Operating Instructions Manual

How to use this device
44/92
12.6.1

Navigation

Via the Control Center the most important settings can be made before start-
ing the device. During the application session, functions may be activated or
deactivated via the control panel inside the device.
Navigation unit - Control Center
The Control Center enables comfortable access to special functions.
Acknowledge selection.
This button's availability is displayed on the operating pan-
el, depending on the function that has been selected.
Acknowledge selection.
This button's availability is displayed on the operating pan-
el, depending on the function that has been selected.
Select device function.
Indicators of available functions are illuminated in default mode after starting
up the beauty device. After selecting a function, the corresponding indicator
flashes for a short time. During this time settings may be changed.
Information about the setting options can be found in the separate document
'Professional Setup Manager' #1014640-.. which is provided in the Technical
Documentation folder.
NOTE:
Only for the studio operator:
To open the Professional Setup Manager, press button
for approximately 3 seconds in standby mode.
All of the pictograms displayed on the screen are illuminated in default mode
after the device starts up.
The relevant pictogram will start to flash after a device function has been
selected. The settings or selection options available for the selected function
will be displayed on the screen.
NOTE:
Pressing and holding
demo mode. This allows you to demonstrate the following
functions without the application.
NOTE:
If no button is pressed within 8 seconds, the settings return to
default mode.
button for 3 seconds activates the