Table of Contents
Advertisement
12
SERVICE WORK ON THE CHASSIS
12.6
Removing the fork protector
12.7
Installing the fork protector
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Remove screws
–
Remove screws
–
Remove screws
H00401-10
–
Position the fork protector on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
–
Position the fork protector on the right fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
H00401-11
p. 87)
and take off the clamp.
on the left fork leg. Take off the fork protector.
on the right fork leg. Take off the fork protector.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
87
.
.
.
Advertisement
Table of Contents
