15
ELECTRICAL SYSTEM
–
Remove the screw on the rear of the turn signal housing.
–
Carefully remove diffuser
–
Push bulb
out of the socket.
Info
Do not touch the reflector with your fingers and keep it free from grease.
–
Lightly push the new lamp into the socket and turn all the way clockwise.
S01033-10
Turn signal (RY10W/socket BAU15s) (
–
Check that the turn signal is functioning properly.
–
Position the diffuser.
Info
Insert catch
–
Insert the screw and first turn counterclockwise until it engages in the thread with a
small jerk. Tighten the screw lightly.
.
lightly into the socket, turn approx. 30° counterclockwise, and pull it
into recess
p. 193)
.
153