11
TUNING THE CHASSIS
11.13
Handlebar position
11.14
Adjusting the handlebar position
Warning
Danger of accidents Handlebar breakage.
–
If the handlebar is bent or straightened it will cause material fatigue, and the handlebar can break. Always replace handlebar.
–
Mount the seat. (
–
Remove the motorcycle from the work stand.
–
Check the static sag of the shock absorber. (
–
Adjust the rebound damping of the shock absorber. (
The holes on the handlebar support are placed at a distance of
Hole distance
The handlebar can be mounted in 2 different positions. In this way, the handlebar can be
mounted in the most comfortable position for the rider.
102144-10
p. 90)
3.5 mm (0.138 in)
p. 78)
p. 76)
from the center.
82