Table of Contents
Advertisement
21
TROUBLESHOOTING
Faults
The engine does not turn when the
starter button is pressed
Engine turns only if the clutch lever is
drawn
The engine turns but does not start
Engine has too little power
Possible cause
Operating error
The battery is discharged
Fuse 1 or 2 blown
Main fuse burned out
No ground connection present
The vehicle is in gear
The vehicle is in gear and the side
stand is folded out
Operating error
Fuse 3 blown
The plug-in connection of the fuel
hose connection is not connected
Defect in fuel injection system
Throttle opened while starting
Air filter is very dirty
Fuel screen is very dirty
Fuel filter is very dirty
Action
–
Carry out the start procedure. (
–
Recharge the battery.
–
Check the quiescent current.
–
Change the fuses of individual power
consumers. (
p. 143)
–
Set the clock. (
p. 47)
–
Change the main fuse. (
–
Check the ground connection.
–
Shift gear to neutral.
–
Shift gear to neutral.
–
Carry out the start procedure. (
–
Change the fuses of individual power
consumers. (
p. 143)
–
Connect the plug-in connection of the fuel line.
–
Read out the fault memory using the Husqvarna
Motorcycles diagnostics tool.
–
When starting, DO NOT open the throttle
–
Carry out the start procedure. (
–
Remove the air filter.
–
Install the air filter.
(
–
Change fuel screen.
–
Check the fuel pressure.
176
p. 57)
(
p. 137)
p. 140)
p. 57)
p. 57)
(
p. 93)
p. 94)
Advertisement
Table of Contents
