Table of Contents
Advertisement
15
ELECTRICAL SYSTEM
15.10
Changing the parking light bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
Main work
–
Pull bulb socket
–
Pull parking light bulb
–
Insert a new parking light bulb in the bulb socket.
Parking light (W5W / socket W2.1x9.5d) (
–
Insert the bulb socket in the reflector.
E00038-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
out of the reflector.
out of the bulb socket.
p. 151)
p. 145)
p. 193)
p. 147)
150
Advertisement
Table of Contents
