Table of Contents
Advertisement
14
WHEELS, TIRES
14.4
Installing the rear wheel
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents No braking effect when operating the rear brake.
–
After installing the rear wheel, always operate the foot brake until the pressure point is reached.
Main work
–
Check the rear hub rubber dampers.
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Remove spacer.
–
Clean and grease shaft seal ring
Long-life grease (
–
Insert the spacer.
–
H00937-11
Clean and grease the thread of the wheel spindle and nut
Long-life grease (
–
Mount the rubber damper and rear sprocket carrier in the rear wheel.
–
Position the rear wheel.
The brake linings are correctly positioned.
(
p. 126)
and contact surface
p. 203)
p. 203)
124
of the spacer.
.
Advertisement
Table of Contents
