Cleaning The Dust Boots Of The Fork Legs; Removing The Fork Protector - Husqvarna TC 65 2020 Owner's Manual

11.4

Cleaning the dust boots of the fork legs

11.5

Removing the fork protector

SERVICE WORK ON THE CHASSIS 11
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the fork protector. (
Main work
–
Push dust boots
Info
The dust boots remove dust and coarse dirt parti-
cles from the inside fork tubes. Over time, dirt can
accumulate behind the dust boots. If this dirt is not
removed, the oil seals behind can start to leak.
S01481-10
Warning
Danger of accidents Oil or grease on the brake
discs reduces the braking effect.
–
Always keep the brake discs free of oil and
grease.
–
Clean the brake discs with brake cleaner when
necessary.
–
Clean and oil the dust boots and inner fork tubes of both fork
legs.
Universal oil spray (
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
–
Remove screws
–
Remove screws
tector.
S01482-10
p. 40)
p. 41)
1
of both fork legs downward.
p. 119)
p. 42)
1
and take off the clamp.
2
on the left fork leg. Take off the fork pro-
p. 40)
41