Table of Contents
Advertisement
14
WHEELS, TIRES
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Screw, wheel speed sensor
S01004-10
–
Position the brake caliper on the brake disc.
The brake linings are correctly positioned.
–
Position spacers
–
Operate the hand brake lever repeatedly until the brake linings are in contact with
the brake disc and there is a pressure point. Fix the hand brake lever in the activated
position.
The brake caliper straightens.
–
Tighten screws
Guideline
Screw, front brake caliper
–
Remove the locking piece of the hand brake lever.
.
in the drill hole.
.
. Mount screws
but do not tighten yet.
.
M10x1.25
M24x1.5
45 Nm (33.2 lbf ft)
M6
6 Nm (4.4 lbf ft)
45 Nm
Loctite
(33.2 lbf ft)
121
®
243™
Advertisement
Table of Contents
