Table of Contents
Advertisement
16
COOLING SYSTEM
16.4
Draining the coolant
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.
Condition
The engine is cold.
–
Stand the motorcycle on its side stand on a horizontal surface.
–
Check the coolant level in compensating tank
The coolant level must be between the two markings.
»
If the coolant level does not match the specified value:
–
Correct the coolant level.
Coolant (
S01022-10
–
Remove radiator cap
The radiator must be filled completely.
»
If the coolant level does not match the specified value:
–
Check the coolant level and the reason for the loss.
Coolant (
–
Mount the radiator cap.
S01023-10
p. 200)
and check the coolant level in the radiator.
p. 200)
.
157
Advertisement
Table of Contents
