Table of Contents
Advertisement
17
TUNING THE ENGINE
17.1
Adjusting the engine characteristic
Preparatory work
–
Switch off the ignition by turning the ignition key to position OFF
–
Remove the seat. (
Main work
–
Pull the Map‑Select switch and holder
–
Pull the Map‑Select switch out of the holder.
E00052-10
–
Turn the adjusting wheel until the desired digit is next to marking
Set the Map‑Select switch to Soft.
–
Set the adjusting wheel to position 1.
Soft – reduced homologated peak performance for better driveability.
Set the Map‑Select switch to Advanced.
–
Set the adjusting wheel to position 2.
Advanced – homologated performance with extremely direct responsiveness.
Set the Map‑Select switch to Standard.
–
Set the adjusting wheel to position 3, 4, 5, 6, 7, 8 or 9.
E00054-10
Standard – homologated performance with balanced responsiveness.
Set the Map‑Select switch to poor fuel quality.
–
Set the adjusting wheel to position 0.
Poor fuel quality – homologated performance is reduced in accordance with
the fuel quality, use for no more than 1 tank of fuel
p. 90)
upward off of the retaining bracket.
161
.
.
Advertisement
Table of Contents
