18
SERVICE WORK ON THE ENGINE
Main work
–
Remove filler plug
Engine oil (SAE 10W/50) (
–
Mount and tighten the oil filler plug
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
–
H01066-10
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the engine oil level. (
and the O-ring from the clutch cover and fill up with engine oil.
p. 200)
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effec-
tive exhaust extraction system.
p. 164)
with the O-ring.
170