14
WHEELS, TIRES
–
Push the rear wheel forward as far as possible and lay the chain on the rear sprocket.
–
Mount wheel spindle
yet.
–
Make sure that chain adjusters
–
Make sure that the markings on the left and right chain adjusters are in the same posi-
tion relative to reference marks
–
Tighten nut
Guideline
Nut, rear wheel spindle
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Screw, wheel speed sensor
S01005-10
–
Position the brake line in the guide.
–
Operate the foot brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.
S01029-10
and chain adjuster
are fitted correctly on adjusting screws
. The rear wheel is then correctly aligned.
.
in the drill hole.
.
. Mount nut
, but do not tighten it
M25x1.5
90 Nm (66.4 lbf ft)
M6
6 Nm (4.4 lbf ft)
125
.