Table of Contents
Advertisement
11.5
Removing the fork protector
11.6
Installing the fork protector
11.7
Removing the fork legs
SERVICE WORK ON THE CHASSIS 11
–
Remove screws
–
Remove screws
–
Remove screws
S01902-10
–
Position the fork protector on the left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
2
screws
.
–
Position the fork protector on the right fork leg. Mount and
S01902-11
tighten screws
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove screws
–
Allow the brake caliper and the brake line to hang loosely to
the side.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
S02315-10
1
and take off the clamp.
2
and take off the left fork protector.
3
and take off the right fork protector.
1
.
M6
10 Nm (7.4 lbf ft)
3
.
M6
10 Nm (7.4 lbf ft)
p. 49)
(
p. 100)
1
and take off the clamp.
2
and take off the brake caliper.
51
Advertisement
Table of Contents
