Table of Contents
Advertisement
15
ELECTRICAL SYSTEM
Main work
–
Connect the battery charger to the battery. Switch on the battery charger.
Battery charger (81229074000)
You can also use the battery charger to test the open-circuit voltage and start poten-
tial of the battery, and to test the alternator. With this device, you cannot overcharge
the battery.
Info
Never remove lid
Charge the battery to a maximum of 10 % of the capacity specified on battery
housing
–
Switch off the battery charger after charging and disconnect from the battery.
Guideline
The charging current, charging voltage, and charging time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
M01404-10
Finishing work
–
Install the battery.
–
Mount the seat. (
–
Set the clock. (
.
.
(
p. 135)
p. 90)
p. 47)
3 months
139
Advertisement
Table of Contents
