15
ELECTRICAL SYSTEM
15.13
Changing the turn signal bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Main work
–
Loosen screw
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the lower mark for
a motorcycle with rider (instructions on how to apply the mark: Checking the
headlight setting).
Info
E00039-10
If you have a payload, you may have to correct the headlight range.
–
Tighten screw
.
.
152