Chapter 4: Calibration
Use the Smart Pro or Smart Pro Pac (the software in both operates identically) to calibrate
the W-4510 Weigh Scale. Refer to the Smart Pro Electronics Reference for instructions to
use the Smart Pro software. To perform the calibration, you must be familiar with the Smart
Pro topics:
•
Navigating through the Smart Pro screens
•
Security access level
•
Product Code
•
Saving to upper RAM
•
Saving to EEPROM
This section provides a summary of the calibration procedure for a standard density. Refer to
the Smart Pro Electronics Reference and the Smart Pro Mini Guide to Fast Startups for more
details.
Smart Pro Note: The instructions in this manual are compatible with Smart Pro firmware
4500.08 or later.
W-4510 Weigh Scale Technical Reference Manual
81