Smart Pro And Pro Pac Connections; Table 8: W-4510 Interconnect To Smart Pro Or Pro Pac-Measure Signal; Table 9: W-4510 Interconnect To Smart Pro Or Pro Pac-Tachometer Signal; Table 10: Tachometer Interconnect To Smart Pro Or Pro Pac-Line Down Signal - Ohmart Vega W-4510 Technical Reference Hardware Manual

Installation

Smart Pro and Pro Pac connections

The measurement signal from pins 6 and 7 go to an Ohmart Smart Pro or Pro Pac. The
measurement signal is 0–100kHz, maximum, true digital, and satisfies RS-422 and RS-423.
See the tables below for interconnect information.
Table 8: W-4510 interconnect to Smart Pro or Pro Pac—Measure signal
From W-4510 Weigh Scale
Pin 8
Pin 9
Shield wire
Table 9: W-4510 interconnect to Smart Pro or Pro Pac—tachometer signal
From W-4510 Weigh Scale
Pin 13
Pin 14
Table 10: Tachometer interconnect to Smart Pro or Pro Pac—line down signal
From W-4510 Tachometer
Contact D
Contact E
32
To Smart Pro
TB 4-1
TB 4-2
TB 4-3
To Smart Pro
TB 4-5
TB 4-6
To Smart Pro
TB 4-8
TB 4-9
W-4510 Weigh Scale Technical Reference Manual
To Pro Pac
TB 1-4
TB 1-5
TB 1-12
To Pro Pac
TB 1-7
TB 1-8
To Pro Pac
TB 2-4
TB 2-5