Re-Cal Considerations; Restrict Air Gap Access - Ohmart Vega W-4510 Technical Reference Hardware Manual

Installation

Re-cal considerations

The W-4510 Weigh Scale requires periodic recalibration. Ensure that you have adequate
room to access the source housing during the calibration procedures. You must actuate the
self-contained absorbers.

Restrict air gap access

Restrict access to the area between the source holder and the side of the conveyor belt.
Cover this area to prevent personnel from placing themselves and foreign material in the gap.
Ohmart personnel can recommend the appropriate restrictions at the commission of your
system.
14 W-4510 Weigh Scale Technical Reference Manual