Table of Contents
Advertisement
TP#
Section
TP1
Analog output#1
TP2
AC/DC power
TP3
AC/DC power
TP4
AC/DC power
TP5
AC/DC power
TP6
AC/DC power
TP7
Analog output #2
TP8
Analog output #2
1.
From the 063 SELECT OUTPUT TYPE, select either of the following options;
•
4–20 or 0–20 Channel #1
•
4–20 or 0–20 Channel #2
Press ENTER
Note: If you require a voltage output, choose 0–20 on screen 63 and connect a
jumper for Channel #1 to JP1 and Channel #2 to JP2
2.
Connect the write protect jumper JP17
3.
Save to EEPROM
4.
Disconnect the write protect jumper, JP17. This protects the information in the
EEPROM.
W-4510 Weigh Scale Technical Reference Manual
Table 13: Smart Pro CPU board test point information
Procedure 7: Select output type
Reference
Voltage signal
+5VDC
+5VDC common
–15VDC
+15VDC
15VDC common
Voltage signal
Voltage signal
Setup
51
Advertisement
Table of Contents
