Table of Contents
Advertisement
Introduction
Communicating with the gauge
Use either a Smart Pro or Smart Pro Pac to enable the following:
•
Initial setup
•
Calibration
•
Operation
Smart Pro software
The Smart Pro software is accessible through the Smart Pro wall mount or rack mount units.
You can use step-by-step method of screen selection for pre-programmed routines or direct
access to screens.
Step-by-step method
The step-by-step method takes you from the Main menus to the sub-menus by moving the
cursor to your choice and pressing SELECT and ENTER. You can press the NEXT SCREEN
and PREVIOUS SCREEN to take you back and forth between menus.
Direct access method
Use direct access to bypass the step-by-step progression of screens and go directly to your
chosen screen. You enter the screen number in the number field in the left hand corner and
press ENTER. For more information concerning function and data entry keys, refer to page
27.
Smart listing
The Smart Listing is a table of RAM addresses that lists the data that is stored at each
address.
This listing contains the software settings that configure each system for individual and
unique applications. You do not normally need this list, since all necessary information for
normal operation is accessible through user-friendly screens.
The top line of the listing's label is Filename. It displays the following information:
•
Shop order name
•
Shop order number
•
Date of printout
•
Time of printout
10
W-4510 Weigh Scale Technical Reference Manual
Advertisement
Table of Contents
