Table of Contents
Advertisement
Output channel setup
The screen at 522 gives direct access to the parameters controlling the two output channels.
There is no need to access this screen for basic gauge operation. The calibration functions
automatically update the values as required.
Note: Personnel that are unfamiliar with the system should not access these screens.
Changing values at these address locations can adversely effect the operation of the gauge.
Screen 522 holds 16 items numbered 0 to 7 (for Channel #1) and 8 to 15(for Channel #2).
Please refer to the tables in Appendix I, page 132 for a complete listing of each item.
W-4510 Weigh Scale Technical Reference Manual
522 FREQOT CHANNEL
ITEM
000
NEXT
CURRENT VAL
NEW VAL
000000
Figure 32: Output channel setup screen
000
000000
Setup
65
Advertisement
Table of Contents
