Source On/Off Lights; Figure 4: Typical W-4510 Detector Outline - Ohmart Vega W-4510 Technical Reference Hardware Manual

Installation

Source on/off lights

To power the On/Off lights, wire the 110VAC to the source housing.
Note: The diagram that follows shows the typical outline. Ohmart supplies certified drawings
for the W-4510 weigh scale. If the diagram and directions in this manual differ from the
certified drawings, follow the certified drawings.
Access cover for
user wiring
Electronics enclosure
Access cover for
Temperature display
servicing electronics
Detector housing

Figure 4: Typical W-4510 detector outline

16 W-4510 Weigh Scale Technical Reference Manual