Installation
Wiring the equipment
Ohmart provides detailed Interconnect drawings for the W-4510 Weigh Scale.
Note: If the instructions on the drawing differ from the instructions in this manual, use the
drawing. It may contain special instructions specific to your order.
Use the drawing notes and the steps that follow to make the input and output connections.
Make the connections at the removable terminal strips mounted on the CPU board. Access
the CPU board by removing the explosion-proof housing cap.
Note: Not all connections are required for operation. See Table 6 for terminal names and
positions.
Figure 12: Typical interconnect diagram
W-4510 Weigh Scale Technical Reference Manual
29