Honeywell UDC 3300 Product Manual page 251

Step Description
8 Exit the Calibration Mode
4/00
Press
until the desired span value is reached in the upper
or
display.
Upper Display
Lower Display
SPAN VAL
For manual calibration, the motor does not move from its
position prior to the start of Position Proportional
calibration.
The controller will store the 100 % value.
FUNCTION
LOOP 1/2
To exit the calibration mode.
LOWER
DISPLAY
or
SET UP
UDC 3300 Controller Product Manual
Action
The desired span
value
239