Section 2 - Installation; Overview - Honeywell UDC 3300 Product Manual

2.1 Overview

Introduction
What's in this section?
4/00
Section 2 – Installation
Installation of the UDC 3300 Controller consists of mounting and wiring
the controller according to the instructions given in this section.
Read the pre-installation information, check the model number
interpretation and become familiar with your model selections, then
proceed with installation.
This section contains the following information:
2.1 Overview
Specifications
2.2 Model Number Interpretation
2.3 Mounting
2.4 Wiring
2.5 Wiring Diagrams
Composite Wiring Diagram
Line Voltage
Input #1/Input #2
Two HLAI
Time Proportional Output
Current Output/Universal Output
Position Proportional Output
Auxiliary Output
Digital Inputs
Communications
Transmitter Power for 4-20 mA 2-wire Transmitter
2.6 Control and Alarm Relay Contact Information
UDC 3300 Controller Product Manual
Topic
Electromechanical
Solid State
10-amp Solid State
Open Collector
Two Current or Two Relay
One Current (Auxiliary) and Three Relay
RS422/485/Modbus
DMCS
Using Open Collector Alarm 2 Output
Using Auxiliary Output
See Page
7
8
12
13
15
18
18
19
20
21
22
22
23
24
25
26
26
27
28
29
29
30
30
31
32
32
33
34
7